Anemometer With Wind Direction Indicator 3D Printer Model
The file 'Anemometer With Wind Direction Indicator 3D Printer Model' is (stl) file type, size is 341.2KB.
The file 'Anemometer With Wind Direction Indicator 3D Printer Model' is (stl) file type, size is 341.2KB.
Anemometer with wind direction indicator.
User Creation Mix: neovista85 - Thingverse
I modified the original project to insert bearings and make some mechanical and aesthetic improvements.
IMPROVEMENTS:
-Prettier aesthetics, with bolder designs and horizontal fins on the wind indicator, as well as improved resolution of the pieces.
-Easy to print.
-Better precision, works even with little wind.
-I modified the project so that the two axles have a separate bearing, this removes the friction between the hub of the wind balls and the wind direction marking (it is only effective if you use "Washer_separation" between the bearings.
-I inserted an improvement in the wind sphere, so that it does not come loose from the cube.
-No glue required.
-I increased the diameter of the fixing rod to 12mm.
Known issues:
-The fitting of the wind spheres still has a gap that needs to be corrected, but it does not interfere with operation.(AJUSTED 30/11/2023)
REQUIRED FOR ASSEMBLY
3x M4 x 12mm Screws
3x M4 Nuts
2x Ball bearing R608 d=8 mm D=22 mm B=7 mm
1x fixing rod diameter 12mm
3D PRINTING SETTINGS
-Parts are already in the recommended guidelines
Base_do_cubo, Base_do_indicador
Layer: 0.15
Walls: 6
Fill:60%
Support: No
Material: PET-G or ABS
Cubo_superior, Cubo_Inferior, Indicador_de_direção v2, 3x Esferas de vento
Layer: 0.2
Walls: 3
Fill:30%
Support: No
Material: PET-G or ABS
| Arruela_separação.stl | 13.9KB | |
| Base_do_cubo.stl | 138.1KB | |
| Base_do_indicador.stl | 224.5KB | |
| Cubo_inferior.stl | 84.4KB | |
| Cubo_superior.stl | 68.4KB | |
| Esfera_de_vento.stl | 126.0KB | |
| Indicador_de_direção.stl | 126.8KB | |
| Indicador_de_direção_v2.stl | 225.4KB |
