Android/Gynoid Arm&Hand V1.0 – By Strohmain´s 3D Printer Model
The file 'Android/Gynoid Arm&Hand V1.0 – By Strohmain´s 3D Printer Model' is (stl) file type, size is 13.5MB.
The file 'Android/Gynoid Arm&Hand V1.0 – By Strohmain´s 3D Printer Model' is (stl) file type, size is 13.5MB.
An android/gynoid arm&hand v1.0
model: female, male
Hi,
I am publishing the android/gynoid parts for the DIY project here.
You can find further information on my website..
https://build-android-techrobots.page
Lets MAKE ;)
....
<>> referral link gets A $3 STARTING GIFT <<>| 3finger_wrist001.stl | 222.5KB | |
| 3finger_wrist002.stl | 201.2KB | |
| 4finger_wrist001.stl | 222.5KB | |
| 4finger_wrist002.stl | 201.2KB | |
| fe_3f_fore01.stl | 415.2KB | |
| fe_3f_fore02.stl | 516.7KB | |
| fe_3f_fore03.stl | 218.0KB | |
| fe_3f_little01.stl | 524.4KB | |
| fe_3f_little02.stl | 415.4KB | |
| fe_3f_little03.stl | 221.2KB | |
| fe_3f_middle01.stl | 507.7KB | |
| fe_3f_middle02.stl | 443.3KB | |
| fe_3f_middle03.stl | 219.4KB | |
| fe_3f_thumb01.stl | 519.5KB | |
| fe_3f_thumb02.stl | 397.8KB | |
| fe_3f_thumb03.stl | 207.5KB | |
| fe_4f_ring01.stl | 516.7KB | |
| fe_4f_ring02.stl | 415.2KB | |
| fe_4f_ring03.stl | 218.0KB | |
| fore_bulk.stl | 533.5KB | |
| fore_split.stl | 220.6KB | |
| knuckle.stl | 108.4KB | |
| little_bulk.stl | 512.3KB | |
| little_split.stl | 257.3KB | |
| ma_3f_fore01.stl | 469.3KB | |
| ma_3f_fore02.stl | 426.2KB | |
| ma_3f_fore03.stl | 218.0KB | |
| ma_3f_little01.stl | 476.1KB | |
| ma_3f_little02.stl | 427.0KB | |
| ma_3f_little03.stl | 221.2KB | |
| ma_3f_middle01.stl | 463.3KB | |
| ma_3f_middle02.stl | 418.3KB | |
| ma_3f_middle03.stl | 219.4KB | |
| ma_3f_thumb01.stl | 462.6KB | |
| ma_3f_thumb02.stl | 405.1KB | |
| ma_3f_thumb03.stl | 207.5KB | |
| ma_4f_ring01.stl | 463.3KB | |
| ma_4f_ring02.stl | 426.2KB | |
| ma_4f_ring03.stl | 218.0KB | |
| middle_bulk.stl | 6.3MB | |
| middle_split.stl | 213.8KB | |
| ring_bulk.stl | 301.5KB | |
| ring_split.stl | 220.4KB | |
| thumb_pitch.stl | 68.8KB | |
| thumb_yaw.stl | 174.6KB | |
| underarm_middle.stl | 201.6KB | |
| underarm_middle02.stl | 33.9KB | |
| underarm_top.stl | 3.8MB | |
| underarm_wrist.stl | 2.3MB | |
| upperarm_bottom.stl | 3.6MB | |
| upperarm_middle.stl | 622.9KB | |
| upperarm_top.stl | 483.7KB |
