Android Prototype P-01 (Action Figure) 3D Printer Model
The file 'Android Prototype P-01 (Action Figure) 3D Printer Model' is (stl) file type, size is 40.6MB.
The file 'Android Prototype P-01 (Action Figure) 3D Printer Model' is (stl) file type, size is 40.6MB.
Printable Action figure.
Simple assembly is required.
This action figure's durability was tested by a 34 month boy.
Assembly instruction is in my youtube channel
Related Object.
Heavy Loader: https://www.thingiverse.com/thing:4357143
Need a super glue and raw 1.75mm filament while assemble the parts.
The object printed by FDM 3d printer with PLA filament.
| backofhands_group.stl | 980.4KB | |
| backofhand_x6.stl | 161.7KB | |
| body_01.stl | 21.7MB | |
| body_02.stl | 1.8MB | |
| body_03.stl | 279.3KB | |
| ColorParts_Group_01.stl | 13.3MB | |
| ColorParts_Group_02.stl | 12.6MB | |
| crowbar.stl | 295.9KB | |
| gun_01.stl | 2.7MB | |
| gun_02.stl | 838.0KB | |
| head_typeA_01.stl | 2.3MB | |
| head_typeA_02.stl | 1.3MB | |
| head_typeA_03.stl | 86.5KB | |
| head_typeA_04.stl | 5.7KB | |
| head_typeB_01.stl | 1.9MB | |
| head_typeB_02.stl | 670.3KB | |
| head_typeB_03.stl | 88.2KB | |
| head_typeB_04.stl | 477.9KB | |
| head_typeB_04_2.stl | 2.2KB | |
| joint_pins_group.stl | 804.8KB | |
| joint_pin_x6.stl | 100.7KB | |
| left_arm_01.stl | 3.8MB | |
| left_arm_02.stl | 2.5MB | |
| left_arm_03.stl | 1.1MB | |
| left_arm_04.stl | 407.5KB | |
| left_foot_01.stl | 2.4MB | |
| left_foot_02.stl | 290.4KB | |
| left_hand_01.stl | 3.4MB | |
| left_hand_02.stl | 3.7MB | |
| left_hand_03.stl | 3.1MB | |
| left_leg_01.stl | 4.6MB | |
| left_leg_02.stl | 1.9MB | |
| left_leg_03.stl | 975.6KB | |
| left_leg_04.stl | 1.2MB | |
| left_leg_05.stl | 493.1KB | |
| left_shoulder_01.stl | 20.8KB | |
| left_shoulder_02.stl | 684.0B | |
| pelvis_01.stl | 12.1MB | |
| pelvis_02.stl | 179.4KB | |
| pelvis_03.stl | 3.4KB | |
| right_arm_01.stl | 3.8MB | |
| right_arm_02.stl | 2.5MB | |
| right_arm_03.stl | 1.1MB | |
| right_arm_04.stl | 407.5KB | |
| right_foot_01.stl | 2.4MB | |
| right_foot_02.stl | 289.7KB | |
| right_hand_01.stl | 3.3MB | |
| right_hand_02.stl | 3.7MB | |
| right_hand_03.stl | 3.1MB | |
| right_leg_01.stl | 4.6MB | |
| right_leg_02.stl | 1.9MB | |
| right_leg_03.stl | 975.6KB | |
| right_leg_04.stl | 1.1MB | |
| right_leg_05.stl | 493.7KB | |
| right_shoulder_01.stl | 11.6KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
