Printed at 40% Infill, with supports for magnet cell laying flat side and droid facing up.
1 Hour Print for my old Ender-3, I'm sure it could go much faster or multiply.
Remixed from https://makerworld.com/en/models/578594 as the model did not come with the slot extruded for the magnets.
Updated to use a 15mm x 2mm magnet with super glue or a 16mm pressed in with super glue. Easy print with tabs behind antenna's for easy removal.
| Half-Droid-Mag.stl | 29.7MB |
