Android Drawers 3D Printer Model
The file 'Android Drawers 3D Printer Model' is (stl) file type, size is 797.09 KB.
The file 'Android Drawers 3D Printer Model' is (stl) file type, size is 797.09 KB.
Android Drawers provides a fun storage solution for small things that will be loved by Android fans and appreciated be everyone else who likes the Android logo figurine.
This is a simple print that, at standard scale, stands 120mm tall. It has four drawers... the body has the largest storage capacity followed by the head then the arms. The arms storage is a slot approx. 3mm wide so ideal for hiding away things like SD / SIM cards and a coin.
The print will take time to print and consume a reasonable amount of filament but the result is well worth the time and cost... because it's unique and fun.
The Android Drawers can be scaled down as adequate clearance has been allowed at standard scale for users with accurate / precise machines and more advanced slicing apps to reduce the size by approx.. 20% if required. The trade-off is that less small things will fit in the arm drawers as the width will be reduced slightly.
This is a really fun and practical storage unit... print one and post images of it at work!
Please refer to the print settings and images for additional information. This print requires good bridging capability (...particularly in the base of the body area. This may require some stringy filament to be cleared away post printing)
Note: If you like this check out the rest of my fun and practical designs.
Tips: Tips are not expected but are appreciated as they help offset my filament costs as much as anything else. However, as I live outside the USA tips cannot be sent to me via PayPal.Me as that service is not supported in my region and this is beyond Thingverse's control. If you feel like sending a tip please use regular PayPal and send it to [email protected] and, to those who do, thanks in advance!
| android.stl |
| arms.stl |
| body.stl |
| head.stl |
