An Oh, Deer Puzzle – Elk. Animal Puzzle As A Home Decor And A Toy For Your Children. 3D Printer Model
The file 'An Oh, Deer Puzzle – Elk. Animal Puzzle As A Home Decor And A Toy For Your Children. 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'An Oh, Deer Puzzle – Elk. Animal Puzzle As A Home Decor And A Toy For Your Children. 3D Printer Model' is (stl) file type, size is 2.5MB.
How do elk greet each other? With a big “elk-come”!
This puzzle of Elk consists of 11 pieces. The Elk Puzzle is an original gift for kids and a beautiful decoration for your home or office. For kids aged 3 years and over. ATTENTION! Use it under the supervision of adults! This Puzzle took 2 tries, and about 8 hours to create. I had to ensure that there was enough space between each part to easily come apart and be put back together with ease.
3D MODEL DESCRIPTION
Wearing one of these keychains is a statement in itself. Period.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Kobra 2 Max 03.45 Hours (will vary according to your printer model)
Approximately Length: 17 cm Assembled
Difficulty level: 9/10. If parts come unstuck from the bed, they must be reprinted. Adding an outer brim can solve print adhesive issues. I didn't need the outbrim in my case.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.24 mm / 100%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 2.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: No.
The parameters above are recommendations made by DragoneyeJo
Happy Printing!
| Elk_Puzzle.stl | 10.4MB |
