This thing was designed to allow you to attach a Raspberry Pi 5 and Pimoroni NVMe BASE to a Pibow Coupe 5.
-Requirements
Raspberry Pi 5
https://www.raspberrypi.com/products/raspberry-pi-5/
raspberry pi 5 active cooler
https://www.raspberrypi.com/products/active-cooler/
Pimoroni NVMe BASE for Raspberry Pi 5
https://shop.pimoroni.com/products/nvme-base
Pimooni Pibow Coupe 5
https://shop.pimoroni.com/products/pibow-5
The combination of Raspberry Pi5 and NVMe BASE does not fit well with Pibow Coupe 5.
This is because the thickness of the NVMe BASE and screws/cables interfere with the fit.
It can be solved by modifying the Pibow Coupe 5 layers a little and adding a new additional layer for NVMe BASE..
lyr3a_009.stl is an additional layer.
(layer3a_009.stp is a STEP format CAD file)
Please refer to the photos for assembly instructions
You will need four M3 8mm bolts and four M3 12mm bolts for assembly.
You will need four M3 10mm bolts and four M3 12mm bolts for assembly.
| layer3a_009.stp | 93.3KB | |
| lyr3a_009.stl | 187.5KB |
