I made this a while back, and thought I could post it for people to print and what they say about it
Depending on your tolerances, you may need to use glue to attach the wings to the fuselage
Since you may get blobs, you may want to remove them for piece connecting to the fuselage-
remove material on the fuselage cutout - remove as desired until you get to fit.
You may use glue on connecting the wings, but angle them a bit upwards - gluing the fuselage is optional, but if you need to glue it, go ahead.
If you have any more concerns then inform me in the comments - or you have trouble.
| Antonov-225-Kit_Card.stl | 679.9KB |
