Amiga RGB To VGA Housing – For Edoardo Kinmami Project 3D Printer Model
The file 'Amiga RGB To VGA Housing – For Edoardo Kinmami Project 3D Printer Model' is (stl) file type, size is 60.0KB.
The file 'Amiga RGB To VGA Housing – For Edoardo Kinmami Project 3D Printer Model' is (stl) file type, size is 60.0KB.
Casing for the PCB Way Shared Project: Amiga RGB 2 VGA by Edoardo Kinmami.
Shared Project is available here:
Housing is made so you can have screws to fasten it on your Amiga, but not all screws from other DB casings will be usable due to length.
Case can be glued together, or secured with two side mounted small screws.
You need to print the top casing with supports, but if you set support overhang angle to 75 degrees, the skewed part of the top casing can be printed without supports for better look.
| DB23VGA.stl | 236.1KB |
