I couldnt find a mount for my gotek with both oled and potentiometer that would not need any modifications on the amiga, so i designed a support that fits those requirements.
This mount uses the original stands for the floppy drive. Everything is designed to screw into the printed holes, no drilling or other screws required.
The gotek is from amigastore.eu, it has to be taken out of its original casing, be careful while disassembling the oled not to rip the ribbon cable since the glue holding the oled screen was also touching the ribbon cable.
The oled screen needs to be glued to the mount, preferably using hot glue
Printed on a Bambulabs A1 with 0.2mm layer height using PLA
| gotek_support_amiga_500_with_oled_and_potentiometer.stl | 97.9KB |
