Amiga 1200 MultiTools For The Modulator Space 3D Printer Model Free Download

Description Files (25)

Summary

Steps:

Choose Your Pin Layout:
o Select either the 2-pin or 3-pin layout for the "Amiga Modulator Mount."
o Both layouts will work for the adapters.
o An "old" variant is available without the extra thin base.
Optional: Use fine sandpaper or a heater to smooth the mount pins.
Recommendation: The "Amiga Modulator Mount 3 pin" is personally recommended, but all options should work.
Mounting the Modulator Mount:
o Attach the Amiga Modulator mount to your mainboard using tiny wood screws from below.
o This should be the final time you need to unmount the mainboard from the case.
Caution: Seek help from a specialist if needed.
Choose a Bracket Kit:
o Select from various bracket kits depending on your specific needs.
Print the Top Lock:
o Print the "Top Lock 2 pin" or "Top Lock 3 pin" based on your previous choice.
Assemble and Secure:
o Assemble all parts and snap the top lock into place.
Printing Tips:
• Depending on the brackets, you might need to experiment with print directions, support, and/or raft.
• For brackets like the MicroSD and MicroSD2x, printing them standing up and with a raft is recommended.
Enjoy your improved setup with easy access and hot-swappable connectors for your Amiga 1200!

Amiga_Modulator_Mount_2_pin.stl	112.5KB
Amiga_Modulator_Mount_3_pin.stl	142.5KB
Amiga_Modulator_Mount_Old_2_pin.stl	119.5KB
Amiga_Modulator_Mount_Old_3_pin.stl	150.4KB
HDMI_ext_-_bottom.stl	247.2KB
HDMI_ext_-_top.stl	37.5KB
MicroSDx2_-_bottom.stl	69.0KB
MicroSDx2_-_mid.stl	62.5KB
MicroSDx2_-_top.stl	389.2KB
MicroSD_-_bottom.stl	67.1KB
MicroSD_-_top.stl	314.6KB
MTS-202_2xSwitch_Vertical_-_bottom.stl	66.9KB
MTS-202_2xSwitch_Vertical_-_top.stl	397.8KB
MTS-202_Switch_Horisontal_-_bottom.stl	53.2KB
MTS-202_Switch_Horisontal_-_top.stl	315.9KB
MTS-202_Switch_Vertical_-_bottom.stl	53.0KB
MTS-202_Switch_Vertical_-_top.stl	308.3KB
Multitool_blank.stl	38.5KB
Top_lock_2_pin.stl	52.0KB
Top_lock_3_pin.stl	73.3KB
USB_Female.stl	451.9KB
USB_Female_Ribbon_-_bottom.stl	623.0KB
USB_Female_Ribbon_-_top.stl	40.3KB
USB_Panel_Mount.stl	532.5KB
USB_Panel_Mount_Wide.stl	706.8KB