AMD Fan Replacement Adapter For Gpu YESTON RX580 3D Printer Model
The file 'AMD Fan Replacement Adapter For Gpu YESTON RX580 3D Printer Model' is (STL) file type, size is 63.5KB.
The file 'AMD Fan Replacement Adapter For Gpu YESTON RX580 3D Printer Model' is (STL) file type, size is 63.5KB.
I recommend using PETG or ABS for its heat resistance
This is a plastic adapter that fits inside the shroud of a YESTON AMD Radeon RX 580 8G graphics card. The purpose of this adapter is to replace the original fans, which are may become wobbly and are hard to find replacement for. It's made to fit with AMD stock cooler fans.
To use this adapter, you first cut the four spokes at the bottom of the AMD stock cooler fans. Then, attach the fans to the printed adapter using zip ties. Secure the adapter onto the heatsink with 3 or 4 zip ties as shown in red, and screw the adapter into the original shroud using the original screws (8 screws instead of 10, as the two long screws for the heatsink are no longer needed).
Finally, you can either create a custom adapter using the original Yeston fans, or plug the GPU fans into the motherboard. You can also get a PCIE Fan Speed Controller, which can be found on eBay, Aliexpress, or Amazon.
This not only resolves the issue of finding replacement fans but also gives the GPU a neat appearance with AMD-branded fans instead of the blue Yeston ones.
| SHROUD_YESTON_AMD_Radeon_RX580_8GB.STL | 256.9KB |
