Amazon Fire HD 10 2023 (13th Gen) Wall Mount 3D Printer Model
The file 'Amazon Fire HD 10 2023 (13th Gen) Wall Mount 3D Printer Model' is (stl) file type, size is 181.5KB.
The file 'Amazon Fire HD 10 2023 (13th Gen) Wall Mount 3D Printer Model' is (stl) file type, size is 181.5KB.
This is a wall mount for a Amazon Fire HD 10 2023, 13th generation. It allows easy mounting of the table for use with Home Assistant or other projects that would benefit from a wall mounted tablet. Button access is optional and can be added, if needed, by drilling a hole for one of the provided buttons, your own or even a small hole, accessed by a paperclip.
15mm and 19mm versions provided.
7mm M2 screws are used with threaded inserts (3.2mm X 2mm) to attach the brackets that hold the tablet in place.
The front and back plates are provided full size for large printers and split for smaller pinters. The split version must be glued together.
For power, a slim right-angle power cable is needed, such as those sold by smarthomemount.com. The power supply should be located close to the display. I am using a DC to DC converter with USB connection located inside an electrical box behind the display.
Bondo glazing & spot putty can be used to smooth layers and the glue seam and were desined with spray paint as the finial finish. If it won't be pained, a darker filament should be used since the front is thin and light passes through easily.
| 15mm-Back_Full.stl | 126.5KB | |
| 15mm-Back_Left.stl | 66.7KB | |
| 15mm-Back_Right.stl | 71.7KB | |
| 15mm-Bracket.stl | 42.3KB | |
| 15mm-Button_1.stl | 37.6KB | |
| 15mm-Button_2.stl | 34.1KB | |
| 15mm-Front_Full.stl | 64.3KB | |
| 15mm-Front_Left.stl | 33.5KB | |
| 15mm-Front_Right.stl | 38.4KB | |
| 15mm-Glue_Support.stl | 684.0B | |
| 19mm-Back_Full.stl | 110.6KB | |
| 19mm-Back_Left.stl | 58.3KB | |
| 19mm-Back_Right.stl | 63.8KB | |
| 19mm-Bracket.stl | 42.3KB | |
| 19mm-Button_1.stl | 37.6KB | |
| 19mm-Button_2.stl | 34.1KB | |
| 19mm-Front_Full.stl | 64.3KB | |
| 19mm-Front_Left.stl | 33.5KB | |
| 19mm-Front_Right.stl | 38.4KB | |
| 19mm-Glue_Support.stl | 684.0B |
