Amazon Basics / Overture Filament Spool Half Box 3D Printer Model
The file 'Amazon Basics / Overture Filament Spool Half Box 3D Printer Model' is (stl,zip) file type, size is 4.6MB.
The file 'Amazon Basics / Overture Filament Spool Half Box 3D Printer Model' is (stl,zip) file type, size is 4.6MB.
Was making a sewing box for someone, and the "Amazon Basics / Overture Filament Spool Box" looked like a perfect starting place, plus it allowed me to up cycle something that would normally go in the trash. I thought it needed a few half sized boxes, so that is what this mostly is.
I am not done with this box, I am going to make a bigger compartment to go on the top eventually, not sure what I am going to do yet, but my guess is most people are only interested in the half boxes.
The files "layer middle" and "layer bottom" are not needed, they are just there for aesthetics and to close off the bottom. If you look at the photo the box is layers of white and black, and that is basically all these layer files are for.
I included the "box half peg bad" but I dont recommend anyone print this. I couldnt get it to print good with or without supports, so I split and edited the file a bit to make it easier to print. So if I was you I would just print "box half peg good" as it works, it just needs assembled.
| box_half_bottom.stl | 1.5MB | |
| box_half_peg_bad.stl | 69.8KB | |
| box_half_peg_good.stl | 6.1MB | |
| box_half_top.stl | 1.1MB | |
| Divider_for_half_box.stl | 3.4KB | |
| halfbox.zip | 2.4MB | |
| layer_bottom.stl | 23.3KB | |
| layer_middle.stl | 105.6KB |
