Altoids Pocket Battleship Game 3D Printer Model
The file 'Altoids Pocket Battleship Game 3D Printer Model' is (stl) file type, size is 3.2MB.
The file 'Altoids Pocket Battleship Game 3D Printer Model' is (stl) file type, size is 3.2MB.
This is a pocket Battleship game designed to fit inside an Altoids tin. I've also made a pocket Connect Four game: https://www.thingiverse.com/thing:2775568
WARNING: I'm still busy developing this design and I still need to get every dimension right, it's quite hard to get all the pegs to fit nicely.
Here's a list of all the things you need and how many of them:
I recommend printing a few pegs and 1 or 2 boats first to see if your printer can handle it and if the pegs fit well. That way you can dial in your printer.
I recommend printing very slowly (especially the boats & pegs) and with a low layerheight. Once I've got everything right, I will update the thing.
Once somebody has printed it I will post a picture of how it should look. If you know the game it should be pretty straightforward and if you don't, here's a link: https://www.thespruce.com/the-basic-rules-of-battleship-411069
If you printed this, please post a pic in the "Made" section and let me know if I should change anything. Have fun!
| Boat_1.stl | 1.1MB | |
| Boat_2.stl | 1.2MB | |
| Boat_3.stl | 1.2MB | |
| Boot_2_v5.stl | 544.4KB | |
| Bottom_field.stl | 3.3MB | |
| PEG_V1.stl | 877.5KB | |
| Top_field.stl | 4.1MB |
