UPDATE (3/24/2024): Added AltoidTin-Organizer3X(1).stl and AltoidTin-Organizer2X(1).stl. These racks are now the same length as AltoidTin-Organizer4X.stl. The shorter length makes it easier to grab the tins from the rack.
I started off making a rack for some Altoid tins I had collected over the years. I soon ran out of tins. So I printed some. Then I realized that a package of screws from Home Depot holds just a little too many screws to fit in the tins. So I made a rack that holds three tins instead of four. The new tins are slightly taller. And just for completeness, I made a rack that holds 2 tins.
All the racks are the same height and width and they all have nesting feet and dimples so you can stack them.
My workbench is now a lot cleaner.
| AltoidTin-2X.stl | 90.1KB | |
| AltoidTin-3X.stl | 90.1KB | |
| AltoidTin-4X.stl | 90.1KB | |
| AltoidTin-Cover.stl | 103.0KB | |
| AltoidTin-Organizer2X.stl | 327.6KB | |
| AltoidTin-Organizer2X2.stl | 286.5KB | |
| AltoidTin-Organizer3X.stl | 351.4KB | |
| AltoidTin-Organizer3X2.stl | 346.5KB | |
| AltoidTin-Organizer4X.stl | 454.9KB |
