All In One Flash Drive + Micro + SD Card Case 3D Printer Model
The file 'All In One Flash Drive + Micro + SD Card Case 3D Printer Model' is (stl) file type, size is 90.1KB.
The file 'All In One Flash Drive + Micro + SD Card Case 3D Printer Model' is (stl) file type, size is 90.1KB.
27.05.2021:
Fixed for a more tight fit
All in one case for :
8 SD cards (in 2 layers)
12 MicroSd cards (in 2 layers)
1 Small flash drive
1 Full size flash drive
with pin lock to stay in place.
2x M3-.50 nut is required.
2x M3-22 screw is required.
Print speed 100%, Infill: from 15% to 100%
| 1_bottom.stl | 91.1KB | |
| 2_midle_bottom.stl | 141.1KB | |
| 3_middle_top.stl | 102.9KB | |
| 4_top.stl | 78.2KB |
