This is a practical star-shaped feeler gauge which ranges from 0.5 mm to 8 mm, it easily and rapidly allows you to measure different gaps with a single tool without the hassle of picking strips.
Just spin it in your hand to select the right clearance!
I suggest to print it with Raft support to avoid warping and depending on the material you're going to use, set the bed temp not too hot: let's say 40°C for PLA if you have adhesion issues, otherwise turn it off.
Warping and overheating can lead to a size mismatch which afterwards results in false readings. Be advised: After printing always check with a caliper if you nailed its original dimension.
| feelergaugev2.stl | 1.5MB | |
| v3.stl | 3.4MB |
