The file 'All-In-One Cartridge Holder For GB, GBA, DS, 3DS, And Switch. Modular And Stackable 3D Printer Model' is (STL) file type, size is 190.7KB.
This is a all-in-one cartridge organizer for Nintendo handheld concoles, including Gameboy, Gameboy Advance, DS, 3DS, and Switch.
This Organizer is modular and stackable, meaning you can arrange any combination of cartridge types you want to put in the same plate, and pile up the plates. One Plate can hold 4 rows of Inserts, with the GB cartridige occupying 2 rows and the rest types occupying 1 row.
.
You will need:
• TPU filament for the Insert
• Another regid filament for the Plate
• 8x3 magnets. I bought mine here https://www.amazon.com/gp/product/B0CDGYTLH6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
.
Printing and Assembly:
• Plate.stl can hold all 4 types of Insert. Plate_thin.stl only holds DS/3DS and Switch Insert to save hight space if you only want to put these two types in the plate.
• It is recomended to print with the magnet holds facing down and use tree_support.
• The magnet holds are tight. If you find it hard to push the magnets in, try trimming the edge of the hold a little bit.
• Given the thickness, Plate.stl requires 2 magnets in each hole to have effective magnetivity. Plate_thin.stl needs only 1 in each hole.
.
STL file description:
Top.STL - The top cover of the stack
Plate.STL - Holds GA, GBA, DS/3DS, Switch
Plate_thin.STL - Holds DS/3DS, Switch
GB.STL - Single GB Insert. Takes 2 rows. Holds 2 cartridge
GB_full.STL - Full plate GB Insert. Takes all 4 rows. Holds 4 cartridge
GBA.STL - Single GBA Insert. Takes 1 rows. Holds 2 cartridge
GBA_full.STL - Full plate GBA Insert. Takes all 4 rows. Holds 8 cartridge
DS 3DS.stl - Single DS/3DS Insert. Takes 1 rows. Holds 3 cartridge
DS 3DS_full.stl - Full plate DS/3DS Insert. Takes all 4 rows. Holds 12 cartridge
SW.STL - Single Switch Insert. Takes 1 rows. Holds 5 cartridge
SW_full.STL - Full plate Switch Insert. Takes all 4 rows. Holds 20 cartridge
DS_3DS.STL | 24.7KB | |
DS_3DS_full.STL | 99.3KB | |
GB.STL | 14.7KB | |
GBA.STL | 6.9KB | |
GBA_full.STL | 21.0KB | |
GB_full.STL | 28.8KB | |
Plate.STL | 161.6KB | |
Plate_thin.STL | 149.5KB | |
SW.STL | 72.4KB | |
SW_full.STL | 289.5KB | |
Top.STL | 124.7KB |