These can be used to align and lock two flat surfaced objects together. These were specifically made to align a flask or a cope and drag in home foundry metal casting. The rod is a 6mm aluminum rod bent to use as the locking pins. These pins will align X and Y axis while locking Z axis. The hole for the screws is tiny so that you may drill to the appropriate screw size. The 6mm angled hole will need to be drilled with a 15/64ths drill bit or 6mm drill bit as it is meant to be a tight fit, and you should put the two pieces together and then drill the hole for a tight locking fit. Of course you will need to print two sets, one for each side of the box. I hope this helps someone.
| Flask_Alignment_Pins2.stl | 58.7KB |
![Latch+toggle+lock+samesize[fix] 3D Printer Model](https://res.3axis.co/e61785db-2156-46aa-8a4b-37e21f25ca01/images/4250df66-6f38-48bd-b278-061b71cbb0b3_thumb.jpg)
