Laser-Cut Tray/Case for the Alchitry FPGA Development Board.
Design is sized for 3mm acrylic, but Fusion 360 file is supplied for your own modifications.
Two SVG files are supplied, one with a 0.17mm kerf applied, the other with no kerf adjustments.
Glue the shims on using CA glue, and mount using M2 bolts+nuts. (For the full stack as pictured, M2x16mm.)
| Alchitry_Case.f3d | 97.3KB | |
| alchitry_case_17_kerf.svg | 13.3KB | |
| alchitry_case_no_kerf.svg | 5.7KB |
