Alby case for Raspberry Pi Zero 2W

This is a case design for a Raspberry Pi Zero 2W. This design has space for an aluminum heatsink of approximately ~8mm in height.

Thing in GitHub: Alby case for Raspberry Pi Zero 2W

Index

• Files Included
  • Extras
  • GCODE-3MF
  • Parts-Assemblys
  • STL
• Print
  • Print
  • Top and Bottom
    • Printer Settings
  • Sockets
    • Printer Settings
• Assembly and extras
• Creator

Files Included

Extras

• alby_logo_top.svg: logo for the top case.
• alby_logo_bottom.svg: logo for the bottom case.

GCODE-3MF

• alby_case_..._.gcode: alby_case_part_top.stl and alby_case_part_bottom.stl ready to print.
• alby_case.3mf: alby_case_part_top.stl and alby_case_part_bottom.stl with all settings ready to export o modify.
• alby_encastres_..._.gcode: x4 alby_encastre_macho.stl and x4 alby_encastre_hembra.stl ready to print.
• alby_encastres.3mf: alby_encastre_macho.stl and alby_encastre_hembra.stl with all settings ready to export o modify.

Parts-Assemblys

• alby_case_raspberry_pi_zero_2w.FCStd: source design to modify.
• alby_case_raspberry_pi_zero_2w.step: all parts.
• alby_case_part_bottom.step: bottom part.
• alby_case_part_top.step: top part.
• alby_encastre_hembra.step: female socket.
• alby_encastre_macho.step: male socket.

STLs

• alby_case_part_bottom.stl: bottom part, print without supports.
• alby_case_part_top.stl: top part, print without supports.
• alby_case_part_hembra.stl: female socket, print guide below.
• alby_case_part_macho.stl: male socket, print guide below.

Print and Assembly Guide

Print

Printer used: Ender 3v2.

alby_case_part_bottom.stl and alby_case_part_top.stl

Printer Settings

• Nozzle: 0.40mm
• Resolution: 0.20mm
• Infill: lightning
• Filament material: PLA
• Raft: no
• Brim: no
• Supports: no

Print pieces together and make a layer color change (M600 Marlin code) at layer 7 or 1.40mm and layer 13 or 2.60mm. Use colors in this order: white, yellow, black.

alby_encastre_hembra.stl and alby_encastre_macho.stl

Printer Settings

• Nozzle: 0.40mm
• Resolution: 0.12mm
• Infill: 100%
• Filament material: PLA
• Raft: no
• Brim: no
• Supports: Grid, Everywhere

Print x4 of each piece.

Assembly and extras

Glue the alby_encastre_hembra.stl to alby_case_part_bottom.stl and alby_encastre_macho.stl to alby_case_part_top.stl in the holes.

Creator

Made with 👐🏻 by Rapax

Tips are welcome through Lightning Zap to ⚡[email protected] or with Lightning QR.