AK47 Rear Sight Rail Replacement 3D Printer Model
The file 'AK47 Rear Sight Rail Replacement 3D Printer Model' is (STL) file type, size is 6.2KB.
The file 'AK47 Rear Sight Rail Replacement 3D Printer Model' is (STL) file type, size is 6.2KB.
Description:
AK47 rear sight rail replacement
Disclaimer:
This is intended for airsoft purpose only. Do not use it on any sort of firearms.
.
Description:
A tiny railed to replace the original rear sight on standard size AK. It allows you to attach a small scope. Tested on JG AK.
.
Extra material required:
1x M3x20mm hex screw
2x M3x8mm set screw
Extra modification required:
Drill three 2.5mm hole on the rail mount base, follow the instruction picture in the gallery.
.
Extra tools required:
1x hand drill / power drill
1x 2.5mm drill bit
| AK47_rear_sight_rail_mount.STL | 18.8KB |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
