Airtag Mount For MTB Or Other Bike With ~34mm Hole. 3D Printer Model
The file 'Airtag Mount For MTB Or Other Bike With ~34mm Hole. 3D Printer Model' is (stl) file type, size is 9.6MB.
The file 'Airtag Mount For MTB Or Other Bike With ~34mm Hole. 3D Printer Model' is (stl) file type, size is 9.6MB.
Choose Bottom_lid with or without flange.
Now with oversized sqeeze-ring available!
If you find fitting too loose i your fork hole, try one of the oversized sqeeze-rigs: ..oversize1mm or ..oversize2mm
Add a m5 nut and a 15mm long countersunk m5 screw.
Mount the pieces together, sqeeze-ring in the middle, align drainage opening with sqeeze ring.
Thread in the screw.
To remove it, just loosen the screw and pull in out of the fork!
To remove the airtag from the holder, use a longer screw to push it out
| Bottom_lid.stl | 5.0MB | |
| Bottom_lid_noflange.stl | 6.0MB | |
| Middle_sqeezering.stl | 2.7MB | |
| Middle_sqeezering_oversize1mm.stl | 3.2MB | |
| Middle_sqeezering_oversize2mm.stl | 3.3MB | |
| Top_airtag_comp.stl | 8.8MB |
