Airsoft/Paintball/Training TPU Rubber Knife 3D Printer Model
The file 'Airsoft/Paintball/Training TPU Rubber Knife 3D Printer Model' is (STL,STEP) file type, size is 9.1MB.
The file 'Airsoft/Paintball/Training TPU Rubber Knife 3D Printer Model' is (STL,STEP) file type, size is 9.1MB.
**16/08/2023 added another version of the Blade.**
Hi there,
I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not sure if your blade is too stiff? Stab yourself very hard, if it hurts, reprint with a softer filament. I personally used 98A TPU.
There is a version of the handle made for and without usage of paracord. Print according to your likings. The sheath is designed to work using only paracord to assemble both parts.
The blade will be without our team Logo. I uploaded the Blade also as a .STEP file, so you can change the visuals of the blade itself or just put your Team Logo or Name on it. If you use a bridge to print logo, I advise to cut 0,4mm into the blade, this way the Logo will be well seen and still be on the same height as the print bed.
Any questions? Ask in the comments!
| 1x_Handguard.STL | 101.9KB | |
| 1x_Handguard_NO_STABILIZER.STL | 48.0KB | |
| 1x_NO_Paracord_Handle_Bottom.STL | 5.8MB | |
| 1x_NO_Paracord_Handle_Top.STL | 2.6MB | |
| 1x_Paracord_Handle_Bottom.STL | 5.8MB | |
| 1x_Paracord_Handle_Top.STL | 2.7MB | |
| 1x_Sheath_Bottom_fixed.STL | 576.8KB | |
| 1x_Sheath_Top_fixed.STL | 576.8KB | |
| 1x_TPU_Blade_NO_LOGO.STL | 178.4KB | |
| 1x_VASEMODE_Blade_stabilizer.STL | 37.6KB | |
| 3x_Screw.STL | 3.4MB | |
| Blade_NO_LOGO.STEP | 57.3KB | |
| BLADE_V3_NO_LOGO.STEP | 64.2KB | |
| BLADE_V3_NO_LOGO.STL | 179.4KB |
