Airsoft V3 Cutoff Switch Holder 3D Printer Model
The file 'Airsoft V3 Cutoff Switch Holder 3D Printer Model' is (stl,step) file type, size is 104.3KB.
The file 'Airsoft V3 Cutoff Switch Holder 3D Printer Model' is (stl,step) file type, size is 104.3KB.
Update: added extenders that can be added to the cutoff lever with glue to provide more surface area to press the switch evenly.
Genuine Omron D2F-FL2-D3 microswitch recommended. It has a low operating force (longer cycle life), metal arm, solder terminals. It'll last longer than clone switches. 12-13mm 2mm (preferably stainless) rods are also required for fitment.
Solder to C and NC (normally closed).
If a low operating force switch is not used, a more powerful spring may be required for the cutoff lever. 3.5x12mm (0.5mm wire diam).
Designed to fit LCT V3 gearbox to work with Perun ETU++, providing information to the mosfet allowing semi automatic fire. This is for bullpup configurations as there is no room for a trigger on the gearbox.
| cutoff_lever_extender_v1_2.5mm.stl | 20.8KB | |
| cutoff_lever_extender_v1_3.5mm.stl | 20.8KB | |
| gearbox_switch_holder.step | 433.4KB | |
| gearbox_switch_holder_V2.stl | 66.3KB | |
| Omron_D2F.stl | 33.6KB |
