Extendable segmented dummy suppressor for airsoft replicas, not for firearm use.
Minimum print requires
Add multiple baffle modules as desired.
Thread is 14x1mm CCW.
Test pieces fitted tightly but adhesive is recommended for more permanent connection
Base and Thread parts allow user to correct orientation depending on muzzle thread timing.
| SO_baffle.stl | 904.8KB | |
| SO_base.stl | 1.6MB | |
| SO_cap_A.stl | 1.4MB | |
| SO_cap_B.stl | 464.3KB | |
| SO_thread.stl | 10.1MB |
