I made a swordfish top rail modification for a airsoft MP5. Remove the end cap, front sight along with flash hider, front sling mount pin and back sight to attach this modification. I printed it in ABS. The Mp5SwordfishA file is the front and comes in a smooth version that doesn't have the fake screw heads and texture on the front. I had to split up the rest of it due to my printer not being big enough to print the B C and D sections but included a joined version if someone has a printer that can do it. I super glued the B C and D sections together. Do not glue the front head A section, It's meant to be able to separate from the rest of the sections and lines up with a tab to section B. Print with supports enabled, my print settings were 230 C, 10% infill, 2 shells and 0.3 mm. I haven't test printed the smooth version or the joined version. Section C can be used as a low profile rail mount.
| MP5SwordfishA.stl | 341.0KB | |
| MP5SwordfishASmooth.stl | 249.6KB | |
| MP5SwordfishB.stl | 17.4KB | |
| MP5SwordfishBCDJoined.stl | 69.9KB | |
| MP5SwordfishC.stl | 37.4KB | |
| MP5SwordfishD.stl | 18.6KB | |
| MP5SwordfishTab.stl | 684.0B |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
