Airsoft Micro HPA Engine 3D Printer Model
The file 'Airsoft Micro HPA Engine 3D Printer Model' is (stl) file type, size is 540.2KB.
The file 'Airsoft Micro HPA Engine 3D Printer Model' is (stl) file type, size is 540.2KB.
Airsoft HPA engine using the operating principle from Kuba T-1000. This is the mechanical comments only. When fed a pulse of air it will extend the nozzle, then release a burst of pressure.
Apologies for the mix of metric and imperial measurements.
Non printed components:
1 x #5 O-ring (5/16 OD x 3/16 ID)
2 x #7 O-ring (1/2 OD x 3/8 ID)
3 x M3-40 bolt (needs to have a flat head)
3 x M3 nut
1 x metal tube (5/8 OD x 1/2 ID x 30mm)
6mm pneumatic tubing (4mm ID)
Optional: 3/16 in x 14mm Steel pin
I created this while trying to miniaturize the Kuba T-1000 mechanism. This was the smallest size I was able to shrink the parts. I never could get much power out of it, 0.5J was the highest energy I got. If anyone can work out how to get more power I would love to know how.
| Braces.stl | 109.5KB | |
| Cap.stl | 152.9KB | |
| Metal_inlet.stl | 449.0KB | |
| Nozzle.stl | 627.3KB | |
| Plastic_inlet.stl | 532.3KB |
