Airsoft Mask Anti-Fog Fan Mount 3D Printer Model
The file 'Airsoft Mask Anti-Fog Fan Mount 3D Printer Model' is (STEP,STL,STP) file type, size is 53.2MB.
The file 'Airsoft Mask Anti-Fog Fan Mount 3D Printer Model' is (STEP,STL,STP) file type, size is 53.2MB.
This is an accessory to stop a cheap Valken mask from constantly fogging. This design requires a 2006 micro fan (20mmx20mmx6mm) and as of right now, you'll have to figure out the battery box/supply. This is a work in progress and may get some tweaks. It still needs a little foam weather strip to seal and a mini zip tie to secure it in the center. Only the V5 fan covers actually flow air, the rest are just examples of exactly what not to design. (Don't be a dumb dumb and test fit it after using non-odorless CA. Normal superglue fumes will permanently fog your mask)
8/20/24 - It worked flawlessly and kept the mask clear during a 95f, 80%+ humidity day. Fan noise is an issue. Not great for hearing teammates.
| Base.STEP | 2.0MB | |
| Fan_Base.STL | 2.7MB | |
| Fan_Cover.STEP | 1.7MB | |
| Fan_Cover.STL | 6.8MB | |
| Fan_Cover_V3.STEP | 20.4MB | |
| Fan_Cover_V3.STL | 17.5MB | |
| Fan_Cover_V4.STEP | 7.1MB | |
| Fan_Cover_V4.STL | 18.5MB | |
| Fan_Cover_V5b.STEP | 13.6MB | |
| Fan_Cover_V5b.STL | 23.9MB | |
| Fan_Cover_V5b.STP | 13.6MB | |
| Fan_Housing.STEP | 7.3MB | |
| Fan_Housing.STL | 9.2MB | |
| Side_Hook.STEP | 275.9KB | |
| Side_Hook.STL | 889.0KB |
