I used 2 20mm m3 bolts to hold them together. I printed this is pla and it works fine.
UPDATE: Unfortunately, I am kinda in a financial problem right now and I had to sell all my guns so there are no longer going to be anymore iterations.
Update: V2
Made the grips more ergonomic
5 layers for top, bottom, side
25% infill
no support
V3: white
More ergonomic
Changed Logo
V4:green
Grip will now sit flushed on the side
V5:pink
The grip now sits more closer to each other
V6:
Forgot to add. My bad
Only minor adjustments so don't worry about it.
V7: brown
The rear points are now closer
Supports are now recommended for the front.
| Magwell_grip_left_V4.stl | 167.1KB | |
| Magwell_grip_left_V5.stl | 204.3KB | |
| Magwell_grip_left_V7.stl | 225.9KB | |
| Magwell_grip_right_V4.stl | 270.6KB | |
| Magwell_grip_right_V5.stl | 351.2KB | |
| Magwell_grip_right_V7.stl | 385.0KB |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
