Made a mag adapter for L96 type airsoft spring rifles to use M4 mags. It was sort of a request and I had already done some work on it before. Print with supports enabled and be careful cleaning out the support structure on the mag release to not break the pivot point pin. It's a little loose and might double feed sometimes.
I've uploaded new updated files that hold the mag in better and is more reliable. Everything is 3d printable except the part that holds in the release lever. I used a nail that has flat head with a 2.48-2.5 mm diameter shaft and cut it with some wire cutters for length and fit. Make sure there is no support structure in the feed tube. Used 0.3mm for the adapter and 0.2mm for the release lever and springs. Make sure there is no debris in the feed tube before using. Uploaded the file MagAdapter3 that has a extended front for those that have issues with the front corners breaking.
| Lever.stl | 14.9KB | |
| MagAdapter.stl | 96.8KB | |
| MagAdapter2.stl | 89.6KB | |
| MagAdapter3.stl | 89.6KB | |
| Spring1.stl | 2.4KB | |
| Spring2.stl | 2.4KB |
