Airsoft Elite Force 1911 Tac Carbine Conversion Kit (wip) (update) 3D Printer Model
The file 'Airsoft Elite Force 1911 Tac Carbine Conversion Kit (wip) (update) 3D Printer Model' is (SLDPRT,STL) file type, size is 1.7MB.
The file 'Airsoft Elite Force 1911 Tac Carbine Conversion Kit (wip) (update) 3D Printer Model' is (SLDPRT,STL) file type, size is 1.7MB.
Here is an update to my Airsoft Elite Force 1911 Tac Carbine Conversion Kit. I've altered some of the features to hopefully fit a little better, as well as make a basic stock to fit on the back. I have also figured out a type of nut and bolt can go through the mounting holes, here is the description and links to mcmaster carr for the info. Once again though I haven't had a chance to print these out to test it so I'm not sure on the tolerances to make everything fit properly, also you will need a spring for the stock clip to hold it in the unfolded position. There isn't a way yet to hold the stock in its folded position either so that needs to be made.
P.S. it was brought to my attention from someone who printed this design I made that the part that was meant to go on the rail of the 1911 was to small and didn't fit. I wanted to give a warning about that and unfortunately I haven't had a chance to edit the design since I am at school. My hope is that after school I will be able to fix the issue and upload an up to date version that will work
Steel Socket Head Screw
10-24 Thread Size, 1" Long (https://www.mcmaster.com/91251a247)
Steel Narrow Hex Nut
10-24 Thread Size (https://www.mcmaster.com/90760a120)
| 1911_kit.SLDPRT | 1023.1KB | |
| 1911_kit_2.STL | 240.0KB | |
| 1911_Stock.SLDPRT | 416.7KB | |
| 1911_Stock.STL | 286.9KB | |
| Stock_clip.SLDPRT | 97.4KB | |
| Stock_clip.STL | 36.2KB | |
| stock_pin.SLDPRT | 42.0KB | |
| stock_pin.STL | 15.3KB |
