Airsoft Avenger 40mm Shower Shell To Taginn Barrel Adapter 3D Printer Model
The file 'Airsoft Avenger 40mm Shower Shell To Taginn Barrel Adapter 3D Printer Model' is (STL) file type, size is 1.5MB.
The file 'Airsoft Avenger 40mm Shower Shell To Taginn Barrel Adapter 3D Printer Model' is (STL) file type, size is 1.5MB.
Adapter to screw a Taginn molded plastic 40mm barrel onto an Avengers shower shell gas head.
This only works with the Avengers shells that have a red band in the middle!
Print with the small side (Avenger side) down, then simply screw the two parts together tightly.
Use something tough like PETG.
The Avengers-side threads are based on Explosive Enterprises Taginn barrel, so this is tagged as a remix.
Update 5/10/24:
V2 adapter uploaded. Too small of a lip behind the Taginn barrel was making them expand slightly when tightened down. A large lip was added to stop this, and now the adapter prints small side down instead of large side down. The model has been optimized to not require supports.
Update 5/14/24:
V3 adapter uploaded. Center hole shrunk a bit to thicken the adapter on the Avengers side. Threads were shearing off due to insufficient thickness.
| TAGINN_Barrel_to_Avenger_Gas_Head_Adapter_v3.STL | 3.4MB |
