Airsoft AN PEQ-15 Box V2 3D Printer Model
The file 'Airsoft AN PEQ-15 Box V2 3D Printer Model' is (STL,STEP) file type, size is 63.8MB.
The file 'Airsoft AN PEQ-15 Box V2 3D Printer Model' is (STL,STEP) file type, size is 63.8MB.
This is a replica PEQ box for an airsoft gun. It's setup to be easier to paint and only requires a 3mm @35mm length bolt, 3mm nut and 3x sections of 6mm long @3mm diameter bamboo barbeque skewer pins to align the face cover.. It prints fine at .12mm layer height, using tree supports at a slow 40mm/s speed. The nut has to be inserted inside the hollow body, think of it as a fun challenge or even a feature.
| Adj_Screw_Head_x2.STL | 799.0KB | |
| Battery_Cap_Strap_Pin.STL | 711.8KB | |
| FlashLight_Cover.STL | 7.1MB | |
| Flashlight_Head.STL | 4.9MB | |
| FlashLight_Stud.STL | 3.4MB | |
| Folded_FlashLight_Cover.STL | 7.5MB | |
| Folded_Laser_Cover.STL | 9.5MB | |
| LaserCover_Filler_ShortPin_x2.STL | 1.9MB | |
| Laser_Cover.STL | 9.1MB | |
| Laser_Cover_LongPin_x2.STL | 1.4MB | |
| Outer_Adj_Ring_x2.STL | 5.1MB | |
| PEQ-15_V2.STEP | 35.6MB | |
| Tall_BatCap_Strap.STL | 4.2MB | |
| Tall_Battery_Cap.STL | 18.7MB | |
| Tall_Battery_Cap_Base.STL | 854.0KB | |
| V2_Allen_Head_x2.STL | 155.7KB | |
| V2_Front_Face.STL | 2.1MB | |
| V2_JackCover.STL | 2.0MB | |
| V2_Main_Body.STL | 32.6MB | |
| V2_Press_Switch_Button.STL | 681.2KB | |
| V2_Press_Switch_Ring.STL | 1.6MB | |
| V2_Rail_Clamp.STL | 2.0MB | |
| V2_Selector_Knob.STL | 3.1MB | |
| V2_Tall_Adj_Knob_x2.STL | 15.3MB | |
| V2_Tall_Knob_Base_x2.STL | 4.1MB | |
| V2_UHP_Button.STL | 3.7MB |
![Airsoft NBB MK23 Rail (V1) [Airsoft Only] 3D Printer Model](https://res.3axis.co/050e9755-0dee-453d-9cfe-6a31c858591f/images/1911a392-6dd2-4fa6-9e8b-2c9831681149_thumb.jpg)
