Airsoft AN PEQ-15 Box V1 3D Printer Model
The file 'Airsoft AN PEQ-15 Box V1 3D Printer Model' is (STL,STEP) file type, size is 49.7MB.
The file 'Airsoft AN PEQ-15 Box V1 3D Printer Model' is (STL,STEP) file type, size is 49.7MB.
Cosmetic toy for an airsoft gun. It's setup to be easier to paint and only requires a 3mm @35mm length bolt, 3mm nut and 3x sections of 6mm long @3mm diameter bamboo barbeque skewer pins to align the face cover.. It prints fine at .12mm layer height, using tree supports at a slow 40mm/s speed. The nut has to be inserted inside the hollow body, think of it as a fun challenge or even a feature.
| Adj_Screw_Head_x4.STL | 799.0KB | |
| Battery_Cap_Strap_Pin.STL | 711.8KB | |
| FlashLight_Cover.STL | 7.1MB | |
| Flashlight_Headl.STL | 4.8MB | |
| FlashLight_Stud.STL | 3.4MB | |
| Folded_FlashLight_Cover.STL | 7.5MB | |
| Folded_Laser_Cover.STL | 9.5MB | |
| Laser_Cover.STL | 9.1MB | |
| Laser_Cover_Filler_ShortPin_x2.STL | 1.9MB | |
| Laser_Cover_Long_Pin_x2.STL | 1.4MB | |
| Outer_Adj_Ring_x4.STL | 5.1MB | |
| PEQ-15_V1.STEP | 30.3MB | |
| Short_Battery_Cap.STL | 14.5MB | |
| Short_Battery_Cap_Base.STL | 959.5KB | |
| Short_Battery_Cap_Strap.STL | 4.1MB | |
| V1_Allen_Head.STL | 143.3KB | |
| V1_Front_Face.STL | 2.1MB | |
| V1_Main_Body.STL | 25.9MB | |
| V1_Press_Switch_Buttonr.STL | 714.6KB | |
| V1_Press_Switch_Ring.STL | 1.5MB | |
| V1_Rail_Clamp.STL | 1.7MB | |
| V1_Selector_Kob.STL | 2.6MB | |
| V1_UHP_Button.STL | 3.7MB |
