Airsoft AK5C 3D Printer Model

Author: @
License: CC BY
File formats: f3d,stl
Download type: zip
Size:18.4MB

The file 'Airsoft AK5C 3D Printer Model' is (f3d,stl) file type, size is 18.4MB.

Summary

WORK IN PROGRESS // NOT DONE YET

TO DO
-TDC Hop Up Mod - In Progress
-Front Sight
-Rear Sight
-Bolt Carrier
-Pistol Grip Bottom Plate
-Reprofile rear buttstock to hold battery and wiring

This is a fully printed airsoft gun that uses off the shelf components in addition to the printed parts. The AK5C is a really cool gun but it's prohibitively expensive and the internals are proprietary. I designed this based off a video game model and spent a lot of time creating solid bodies in F360. The F360 file is uploaded, feel free to update/remix.

Parts Required

To Make:

  • Remove the selector plate from the V3 gearbox
  • Remove the fire select gears and related components from V3 gearbox
  • Print all parts, try to align so that shear forces are spread across the aluminum tubes

Assembly Steps (test fit everything without glue first)

  • Add M4 mag release to lower receiver
  • Glue lower rail to front end
  • Glue inner barrel bushings (at least 3) into the aluminum tube for the front end
  • Glue to front end to the aluminum tube, making the tube end and the receiver interface parallel/even
  • Glue the front gas block, sling mount and muzzle brake to the other aluminum tube, cut to length to fit the front end
  • Add inner barrel into upper receiver, then bucking, then hopup. Move hopup chamber forward to the receiver face, and pivot the V3 gearbox w/alignment spacer into the upper receiver.
  • Drop upper receiver into lower receiver
  • Add pins (Bic pen fits perfectly)
  • Add rear aluminum tube into buttstock, fitting all the way to the back of the gearbox (trim to length if needed)
  • Cut 9mm OD tube to a length of ~11mm, test fit into hopup chamber interface and see if a magazine will feed. When length is good, glue in place (remove the rest of the parts, make sure it stays 90*)
AK5C_F360.f3d 17.0MB
Buttstock.stl 556.7KB
Front_End.stl 842.8KB
Front_Gas_Block.stl 710.1KB
Front_Lower_Rail.stl 43.2KB
Front_Sling_Mount.stl 1.3MB
Gearbox_Alignment_Spacer.stl 53.6KB
Inner_Barrel_Bushing.stl 99.3KB
Lower_Receiver.stl 1.2MB
M4_Mag_Release_Button_Bumper.stl 60.2KB
Muzzle_Brake.stl 295.3KB
Trigger_Extension.stl 39.1KB
Upper_Receiver.stl 374.9KB