Made a airsoft AK AEG adapter for M4/M16/AR AEG type magazines. Print upside down with supports. Made a new version that has two parts and needs a spring from a retractable pen to work. Like the first version print the main body A part upside down and the B part on its side and use supports.
I've uploaded new updated files that hold the mag in better and is more reliable. Everything is 3d printable except the part that holds in the release lever. I used a nail that has flat head with a 2.48-2.5 mm diameter shaft and cut it with some wire cutters for length and fit. Make sure there is no support structure in the feed tube. Used 0.3mm for the adapter and 0.2mm for the release lever and springs. The fit might be tight on a AK 47 and possibly difficult to remove the adapter.
| AKAdaptForM4Mag.stl | 67.9KB | |
| AkAdaptForM4Mag3.stl | 82.9KB | |
| AKAdaptForM4MagV2A.stl | 77.5KB | |
| AKAdaptForM4MagV2B.stl | 17.1KB | |
| Lever.stl | 14.9KB | |
| Spring1.stl | 2.4KB | |
| Spring2.stl | 2.4KB |
