Airsense 11 Advanced Filtration 3D Printer Model
The file 'Airsense 11 Advanced Filtration 3D Printer Model' is (stl) file type, size is 943.2KB.
The file 'Airsense 11 Advanced Filtration 3D Printer Model' is (stl) file type, size is 943.2KB.
Since a CPAP/APAP creates constant pressure, there is constant airflow through the machine, and the air you breathe comes solely from the machine, which in turn comes entirely from the machine intake.
This seemed like a good opportunity: Purify the air going into the machine, and you'll be breathing the cleanest air in the house!
This design allows the AirSense 11 to pull air through a Honeywell Type R filter and Type A pre-filter.
Yes, this is absurdly over-sized for the machine. This offers a few advantages:
*You may still want to change the Type A filter. Activated charcoal has limited capacity for absorbing VOCs.
| Adaptor1.stl | 621.1KB | |
| Adaptor2.stl | 1.1MB | |
| AdaptorGasket1.stl | 74.4KB | |
| AdaptorGasket2.stl | 70.4KB | |
| FilterChamber1.stl | 1.2MB | |
| FilterChamber2.stl | 172.7KB |
