AirHarp Lira And AirHarp USB 3D Printer Model

Author: @
License: CC BY
File formats: brd,sch,skp,stl,dae
Download type: zip
Size:798.4KB

The file 'AirHarp Lira And AirHarp USB 3D Printer Model' is (brd,sch,skp,stl,dae) file type, size is 798.4KB.

Summary

The AirHarp is an ultrasonic digital autoharp created by Peter Alaric DeSimone. The musician selects chords by pressing buttons with one hand, and strums them in the air (like an invisible harp) with the other. As an open source project, all hardware, software and support documentation is published free at: http://www.airharp.com

AirHarp_Lira_2.02.brd 110.5KB
AirHarp_Lira_2.02.sch 518.0KB
AirHarp_Lira_bottom_06.skp 345.8KB
AirHarp_Lira_bottom_06.stl 44.4KB
AirHarp_Lira_switch_actuator_02.dae 11.1KB
AirHarp_Lira_switch_actuator_02.skp 18.1KB
AirHarp_Lira_switch_actuator_02_v.stl 3.4KB
AirHarp_Lira_top_06.skp 676.2KB
AirHarp_Lira_top_06.stl 192.4KB
AirHarp_Shield_1.202.brd 15.2KB
AirHarp_Shield_1.202.sch 89.5KB
AirHarp_USB_case_fixed_001.skp 151.4KB
AirHarp_USB_case_fixed_001_bottom.skp 116.8KB
AirHarp_USB_case_fixed_001_bottom.stl 22.5KB
AirHarp_USB_case_fixed_001_top.skp 132.0KB
AirHarp_USB_case_fixed_001_top.stl 55.6KB