NEW SILENCER DESIGN FOR 2020! We are happy to present our new silencer “Revolution” with unmatched noise dampening results. The baffles redirect more of the air than in previous models and therefore have a higher ratio / more effective baffles contra total volume of the silencer. This is the extra-long model with a total length of 250 millimeter and a diameter of 40 millimeter offering maximum backyard friendly shooting. This silencer is for caliber 177" / 4,5 millimeter.

Full resolution and fully functional .STL-file is available at Cgtrader:

https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/airgun-silencer-revolution-22

The Revolution silencer are available in calibers:

• .177” / 4,5 mm
• .22” / 5,5 mm
• .25” / 6,35 mm
• .30” / 7.62 mm

Fully functional, 1-piece strong and dependable construction with superior sound moderating characteristics and repeatable accuracy.

Improvements:

• The 1/2 UNF thread is improved and is ready to be directly screwed on the barrel after 3D-printing – cleaning with plug tap is not necessary. Screw the silencer on and off five times and the threads are settled in and airtight.
• The inner hole / trajectory is cone shaped that insures no impacts while maintaining tight tolerances.
• The front of the barrel is labeled with the intended caliber.
• The surface of the silencer is smooth for easy spray-painting or attachment of lusterless “hockey tape” / black textile tape.

For best results when 3D-printning_

• Use a layer height of 0,1 – 0,15 mm.
• Set the print speed to maximum 40 mm/sec, for decreased vibrations.
• Suitable printing materials: PLA tough or regular PLA.
• The silencer must be printed with the threads up, se picture.
• Do not use supports. The angle of the baffles are 45 degrees, the overhang is within limitations.
• If your printer has build plate adhesion problems, print the silencer with a raft or a brim.
• 3D-printing time is around 25 hours when 0,15 mm layer height and 40 mm/sec is set.

Constructed in Sweden by experienced machine engineers.