Lightweight airgun pellets in .22 and .25
Inspired by
".22 airgun pellet" by Andersi on Thingiverse: https://www.thingiverse.com/thing:3123968
and also snap-in-bb pellets
Sets of 50 pellets for printing without brim/raft/supports/ets. 0.5mm spacer between the pellet and base plate for easy separation by razor.
STEP files included for convinience of futher adoptaions.
For PCP / CO2 airguns. Not recommended for springers (see comment #1)
.22 diabolo 0.08g (1.23 gr)
.25 diabolo 0.13g (2.0 gr)
.22 bb 0.45g (6.94 gr)
.25 bb 0.50g (7.72 gr)
| bb_pellet_22.STEP | 47.4KB | |
| bb_pellet_22.STL | 1.8MB | |
| bb_pellet_22_set50.STEP | 2.8MB | |
| bb_pellet_22_set50.STL | 94.1MB | |
| bb_pellet_25.STEP | 47.4KB | |
| bb_pellet_25.STL | 1.9MB | |
| bb_pellet_25_set50.STEP | 2.8MB | |
| bb_pellet_25_set50.STL | 96.4MB | |
| diabolo_22.STEP | 29.4KB | |
| diabolo_22.STL | 527.4KB | |
| diabolo_22_set50.STEP | 1.9MB | |
| diabolo_22_set50.STL | 28.1MB | |
| diabolo_25.STEP | 29.4KB | |
| diabolo_25.STL | 527.4KB | |
| diabolo_25_set50.STEP | 1.9MB | |
| diabolo_25_set50.STL | 28.1MB |
