3 way splitter for 6mm outer diameter air tubing. There are designs for printing with 0.25mm extrusion width and 0.4mm extrusion width. The ones designed around a smaller printer nozzle will allow more air flow. Both are designed to be printed in the orientation shown in thingiverse blue without support (though you can probably print it upside down, but a brim might be needed in that case).
Printer:
Filaments:
| 1_to_3_Splitter.stl | 16.8MB | |
| Large_1_to_3_Air_Adapter_-_250_micron.stl | 14.0MB | |
| Large_1_to_3_Air_Adapter_-_400_micron.stl | 13.9MB | |
| Small_1_to_3_Air_Adapter_-_250_micron.stl | 16.3MB | |
| Small_1_to_3_Air_Adapter_-_400_micron.stl | 16.8MB |
