I needed a pellet holder for my Crosman 1377, but there just weren't any available that suited me. I wanted something that would attach to my Crosman Shoulder Stock and be easy to open and close, but not let the pellets spill.
I borrowed some files from this project: (https://www.thingiverse.com/thing:3664788). It's a really rough hack, but it works!
The resulting "Pellet Drawer" attaches to the lower rail of the gap in the stock. If you rest the device on that rail at about the halfway point and slide it toward the grip it will "grab" and stay there by friction. A couple drops of super glue would make the attachment semi-permanent.
The drawer has a little handle to pull it out of the holder. I holds around 50 .177 pellets.
I put in 2 small magnets: one in the nose of the main tube and one in the drawer. They are 1/2 inch x 1/2 inch x 1/8 inch Neodymium that you can easily get online. (see photo)
The magnets make the drawer stay closed during pumping, shooting and general handling of the gun. You can shake the gun all over and the drawer will not open!
Feel free to clean this up and change it to suit your needs!
| inner_part.stl | 462.5KB | |
| tube_part.stl | 976.0KB |
