I threw together a bunch of random files I have collected over the years to make an air-defense turret/bunker objective or terrain piece for table top gaming or for my 5yo to use in the sandbox.... Should be pretty easy to throw together, it is split for easy printing on FDM, the turret sticks on with a 4mm magnet. Printing it on a Bambu Labs Carbon X1-C at .2 layer height
| Air_Defense_Bunker_-_Complete.stl | 18.9MB | |
| Bunker_Wings_-_Bottoms_-_2h30m.3mf | 4.0MB | |
| Bunker_Wings_-_Tops_-_4h24m.3mf | 2.9MB | |
| Bunker_Wing_-_Bottom_-_Print_3x.stl | 12.0MB | |
| Bunker_Wing_-_Top_-_Print_3x.stl | 8.5MB | |
| Laser_Turret_Base_-_Print_1x.stl | 40.3KB | |
| Laser_Turret_Gun_Barrel_-_Print_2x.stl | 204.1KB | |
| Laser_Turret_Gun_Swivel_-_Print_1x.stl | 74.9KB | |
| Laser_Turret_Sides_-_Print_2x.stl | 139.8KB | |
| Main_Bunker-_Hatch_and_Vent_Wall_Greeble_-_Print_1x.stl | 15.7KB | |
| Main_Bunker_-_All_Greebles_and_Doors_-_1h37m.3mf | 169.9KB | |
| Main_Bunker_-_Bottom_-_Print_1x.stl | 4.4KB | |
| Main_Bunker_-_Bottom_-_Print_1x_-_2h43m.3mf | 31.6KB | |
| Main_Bunker_-_Laser_Turret_All_Pieces_-_4h46m.3mf | 162.1KB | |
| Main_Bunker_-_Main_Bunker_Door_-_Print_1x.stl | 123.0KB | |
| Main_Bunker_-_Top_-_Print_1x.stl | 26.6KB | |
| Main_Bunker_-_Top_-_Print_1x_-_1h10m.3mf | 34.0KB | |
| Main_Bunker_Greeble_-_Exhaust_Pannel_-_Print_1x.stl | 213.0KB | |
| Main_Bunker_Interior_Pillbox_Door_-_Print_3x.stl | 51.6KB | |
| Main_Bunker_Vent_Fan_-_Print_2x.stl | 18.1KB | |
| Main_Bunker_Wall_Greeble_-_Print_1x.stl | 9.0KB | |
| Main_Bunker_Wall_Greeble_-_vent_slats_-_Print_1x.stl | 10.5KB |
