MORE PRINT VOLUME:
Increased the lateral separation of 234 mm to 250 mm.
It has moved 10 mm heated platform down.
MORE ROBUST:
The thickness of the acrylic has risen to 6 mm.
The introduction of a crosspiece to give more rigidity.
DESING MADE CONSIDERING THE WIRING:
The electronics is on the left side of the printer, it is placed horizontally to get the cable up coming from above.
ACKNOWLEDGEMENTS:
Like last time, the magnificent infographics have been made with Cinema 4D + VRay by PIKELO.
SPANISH VERSION AT:
http://reprap.org/wiki/Prusa_Aire#PRUSA_AIR_2.2C_Redise.C3.B1o
Prusa_Air_2.0.dxf | 314.7KB | |
Prusa_Air_2_Front.pdf | 26.9KB | |
Prusa_Air_2_LeftProfile.pdf | 37.7KB | |
Prusa_Air_2_Plan.pdf | 36.1KB | |
Prusa_Air_2_RightProfile.pdf | 14.6KB | |
Scuad_01.stl | 37.4KB |