Ahsoka Tano’s Lightsabers (Clone Wars) 3D Printer Model
The file 'Ahsoka Tano’s Lightsabers (Clone Wars) 3D Printer Model' is (stl) file type, size is 6.0 MB.
The file 'Ahsoka Tano’s Lightsabers (Clone Wars) 3D Printer Model' is (stl) file type, size is 6.0 MB.
Ahsoka Tano's Lightsabers from the Star Wars: Clone Wars animated series!
Be sure to print 2 tabs for the main hilt. All of the STLs are in the orientation I printed them. Personally, I printed the tabs of the main saber and the Outer Chamber of the off hand saber with supports generated in Cura.
If you have a smaller build plate height wise, there are split versions of the outer chambers provided. they are labeled as "SPLIT Outer Chamber Upper and Lower" for both hilts.
Updated on 1/4/17: Added Ahsoka's off hand saber and some tweaks to her main hilt
| Ahsoka_Off-Hand_-_Button_1.stl |
| Ahsoka_Off-Hand_-_Button_A.stl |
| Ahsoka_Off-Hand_-_Inner_Chamber.stl |
| Ahsoka_Off-Hand_-_Lower_Emitter.stl |
| Ahsoka_Off-Hand_-_Middle_Emitter.stl |
| Ahsoka_Off-Hand_-_Outer_Chamber.stl |
| Ahsoka_Off-Hand_-_Pommel.stl |
| Ahsoka_Off-Hand_-_SPLIT_Outer_Chamber_Lower.stl |
| Ahsoka_Off-Hand_-_SPLIT_Outer_Chamber_Upper.stl |
| Ahsoka_Off-Hand_-_Upper_Emitter.stl |
| CW_Ahsoka_-_Button_Housing.STL |
| CW_Ahsoka_-_Inner_Chamber.STL |
| CW_Ahsoka_-_Large_Button.STL |
| CW_Ahsoka_-_Large_Button_Inner.STL |
| CW_Ahsoka_-_Lower_Emitter.STL |
| CW_Ahsoka_-_Middle_Bottom_Chamber.STL |
| CW_Ahsoka_-_Middle_Chamber.STL |
| CW_Ahsoka_-_Middle_Emitter.STL |
| CW_Ahsoka_-_On-Off_Button.STL |
| CW_Ahsoka_-_Outer_Chamber.STL |
| CW_Ahsoka_-_Pommel.STL |
| CW_Ahsoka_-_Red_Button.stl |
| CW_Ahsoka_-_Small_Button.STL |
| CW_Ahsoka_-_SPLIT_Outer_Chamber_Lower.STL |
| CW_Ahsoka_-_SPLIT_Outer_Chamber_Upper.STL |
| CW_Ahsoka_-_Tabs.stl |
| CW_Ahsoka_-_Upper_Button.stl |
| CW_Ahsoka_-_Upper_Button_Outer.stl |
| CW_Ahsoka_-_Upper_Emitter.STL |
