AHHH A Mythical Beast? Dragon Puzzle / How To Train Your Dragon Puzzle DragoneyeJo 3D Printer Model
The file 'AHHH A Mythical Beast? Dragon Puzzle / How To Train Your Dragon Puzzle DragoneyeJo 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'AHHH A Mythical Beast? Dragon Puzzle / How To Train Your Dragon Puzzle DragoneyeJo 3D Printer Model' is (stl) file type, size is 3.5MB.
Why did the dragon bring a pillow to the knight’s fight? So he could have a soft landing.”
This puzzle of a Dragon consists of 17 pieces. The Dragon Puzzle is an original gift for kids and a beautiful decoration for your home or office. For kids aged 3 years and over. ATTENTION! Use it under the supervision of adults! This Puzzle took 2 tries, and about 8 hours to create. I had to ensure that there was enough space between each part to come apart and be put back together easily. I also had to make sure that certain parts weren't too small.
3D MODEL DESCRIPTION
Wearing one of these keychains is a statement in itself. Period.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Kobra 2 Max 09.00 Hours (will vary according to your printer model)
Difficulty level: 9/10. If parts come unstuck from the bed, they must be reprinted. Adding an outer brim can solve print adhesive issues. I didn't need the outbrim in my case.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.24 mm / 100%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 2.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: No.
The parameters above are recommendations made by DragoneyeJo
Happy Printing!
| Dragon_puzzle.stl | 14.1MB |
