AG Fatshark Dominator Module Doors (LaForge And Stock) 3D Printer Model
The file 'AG Fatshark Dominator Module Doors (LaForge And Stock) 3D Printer Model' is (stl) file type, size is 7.3MB.
The file 'AG Fatshark Dominator Module Doors (LaForge And Stock) 3D Printer Model' is (stl) file type, size is 7.3MB.
A lot of time and prints was required to get these files designed perfectly. They were designed from scratch using 123D by Anthony Kwon. I wanted to give the best Dominator doors to the community. If you want to give back, please purchase the STL at https://pinshape.com/items/20862-3d-printed-ag-fatshark-dominator-module-doors-laforge-and-stock . If the purchase price is too high, a small paypal donation can also be sent to [email protected]
Replacement printed module doors for the Fatshark Dominator series of FPV Goggles. Includes:
NOTE: there could be some variances of the screen height on some modules (just the manufacturing process) please use caution when first clicking it in. If you think the screen is going to hit... heat the four pins (that hold the screen onto the module) and push the screen gently closer to the board. I have heard atleast one person's LaForge module having a higher seated OLED screen. I have also NOT used the included double sided tape to mount the module. (using this will also increase the screen height - and increase your chance of having the screen touch the door)
| AG_LaForge_DoorA.stl | 2.4MB | |
| AG_LaForge_DoorA_B2_Stealth.stl | 2.5MB | |
| AG_LaForge_DoorA_B2_Stealth_SHORTER.stl | 2.4MB | |
| AG_LaForge_DoorA_B2_Stock.stl | 4.7MB | |
| AG_LaForge_DoorA_B2_Stock_NOhole_SHORTER.stl | 4.5MB | |
| AG_LaForge_DoorA_B2_Stock_SHORTER.stl | 4.6MB | |
| AG_LaForge_DoorA_noAVhole.stl | 2.5MB | |
| AG_LaForge_DoorA_noAVhole_SHORTER.stl | 2.4MB | |
| AG_LaForge_DoorA_SHORTER.stl | 2.3MB | |
| AG_LaForge_DoorA_Stock_SHORTER.stl | 2.2MB | |
| AG_LaForge_DoorB.stl | 6.8MB | |
| AG_LaForge_DoorB_smaller_window.stl | 6.8MB | |
| AG_LaForge_DoorB_smaller_window_wirehole.stl | 6.9MB | |
| AG_LaForge_DoorB_wirehole.stl | 6.9MB | |
| AG_OEM_DoorA.stl | 2.4MB | |
| AG_OEM_DoorA_SHORTER.stl | 2.3MB | |
| AG_OEM_DoorB.stl | 2.6MB |
