The file 'Afterburner & Variable Nozzle 3D Printer Model' is (stl) file type, size is 9.0MB.
The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet, afterburner and variable exhaust nozzle.
Turbojet link: https://www.thingiverse.com/thing:6710929
For this build you'll need additional hardware. It adds afterburner and nozzle, making the model longer. The design philosophy matches the turbofan, with hints of the GE J79 visible in the liner and flame holders.
I designed a stand. Making the jet sit low to the ground. It works great!
Stand link: https://www.thingiverse.com/thing:6710955
I made a video and written instructions for assembly. ( Video is more thorough).
Video: https://www.youtube.com/watch?v=q-FUjxFJqak
Written: https://www.printables.com/model/952835-3d-printable-turbojet-engine
My print profile uses three colors and 0.16mm layers for smoother hinges.
I offer a great kit on my website. It provides quality hardware and greatly supports my work. Thank you.
https://linus3d.de/products/variable-nozzle-kit
Check out the Turbojet engine!
Happy printing and great success! Message me with any questions!
Bearing_Pin.stl | 101.2KB | |
Bearing_Roller.stl | 1.1MB | |
Control_Ring.stl | 3.4MB | |
Corrugated_Liner.stl | 7.6MB | |
Flame_Holder.stl | 8.7MB | |
Jet_Pipe.stl | 1.1MB | |
Large_Flameholder.stl | 2.7MB | |
Primary_Petal.stl | 584.7KB | |
Secondary_Petal.stl | 356.1KB | |
Secondary_Petal_Pin.stl | 422.5KB |